Improper use of the packer in the brick factory may lead to failure, small parts may be damaged, and large parts may lead to the paralysis of the machine. No matter which kind of packer should pay attention to maintenance in the process of use, so as to prolong the service life and enable users to get greater benefits. The price of the full-automatic packer in the brick factory and the packer in the brick factory. Below, Yude Xiaobian will summarize some tips for you to solve the trouble of frequent failure of brick semi-automatic packer.

As for the packing belt, if the packing belt breaks during the brick packing process, the machine must check whether there is any residual packing belt in the machine head, and the belt can be sent again after confirmation; If the machine breaks or stops after being tensioned without welding, the possible reason is that the broken belt detection does not give a signal. The broken belt switch must be verified next time to ensure that the machine is damaged. Press the emergency stop button immediately regardless of any abnormal condition of the machine. Do not force the use to continue brick packaging.

In the process of brick packing, if the belt feeding is not in place, first observe whether there are brick chips in the guide belt groove and whether there are abnormalities in the tension of the guide belt sheets on both sides of the guide belt groove, and check whether the poor quality of the packing belt leads to cracking, which makes the machine unable to move forward smoothly. In addition, if the stop position of the hanging basket is incorrect, it must be di marked at a time and observed in the future cycle. If it occurs frequently, it is necessary to check the shape of the sensing plate and the distance between the front, rear, left and right, and ensure that the stop position of each hanging basket is correct. If there are many broken bricks in the kiln car and no car is used for cleaning, it should be noted that the hanging basket on the side without guide rail should not be blocked by the discarded broken bricks, which will seriously lead to the deformation of the hanging basket.

The brick packing environment of brick factory is relatively complex, and the semi-automatic brick packer should pay more attention to the maintenance during the packing process. If the fault occurs, it should be solved in time to ensure the service life of the packer.